• See the following.

1. Print the dot position adjustment pattern.
(The size of the pattern to be printed is approx. 300 mm (feed) x 400 mm (width))

---

---

---

2. Check the correction value from the printed pattern.
* Refer to the figure below for the checking method.

---

---

---

3. Register the correction value.
 (1) Press Up & Down keys to change the values and move to the next pattern by pressing ENTER.
      (If you want to go back to the previous pattern, press END.)

---

---

(2) After registering the Pattern 8 and pressing ENTER will take you to the print start screen.
  Press the END key several times to return to the LOCAL screen.

---

---

This concludes the DROP.POScorrect.

* The results of dot position adjustment will not be reflected in the printed patterns.
Print the data and confirm that the dot position misalignment has been improved.

---